Understanding UE FITS Pairing

UE FITS uses a TrueWireless Stereo pairing system. TrueWireless earbuds can use two different types of Bluetooth connections. Your UE FITS is going to connect using TrueWireless Stereo or TWS. 

 

So what is TWS? 

 

TWS is a connection style that uses one of your UE FITS earbuds as the primary connection between your media source and your second UE FITS earbud. Earbud one sends a signal to the source device, your phone, for example, connects, and then forwards the same signal to earbud two, providing an immersive surround-sound experience. 

 

When you are initially getting paired your phone will pair to both earbuds first so that you can use your left and right independently or together. From there, your UE FITS will pair dynamically to suit how you are using them.

 

tws_illustration.png

 

The earbud that you take out of the case first is your primary earbud. The primary will get the signal from your phone and forward it to your secondary earbud. If you want to use just one earbud, simply place the earbud you are not using back in the charging case and close it. You may hear a brief pause in your audio if the earbud you put in the case was acting as the primary. Not to worry this is just your earbuds switching the primary to the earbud not in the case.

 

*** If you see “UE FITS L and R” in your Bluetooth settings, the connection will work slightly different.

 Whichever you select first either “l or R” will be the primary bud and the alternate side will be the secondary bud. This means the primary bud is connected directly to your audio device and then transfers the audio signal to the secondary bud. In this case, you will only see the primary side show up as connected on your Bluetooth settings, this is completely normal.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.